
Monophase MIG / MAG Welding MachinesmonoMIG 200ik | Inverter Technology for Workshops
• Operates with 1 Phase 230V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
• Due to inverter technology, energy efficiency is higher than the conventional machines.
• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. EN, EP Connectivity.
• Welding Voltage, Wire Feeding Speed, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings and 2/4 Trigger options are adjusted
on the front panel.
• Large digital displays for easy monitoring of welding parameters.
• Manual wire feeding and gas valve buttons.
• ø300 mm, ø270 mm and ø200 mm spools, drums of any size and ø100 mm spool with a spool gun can be used with monoMIG 200ik.
• ø200 mm spools and ø100 mm spool with a spool gun can be used with megaMIG.
• 24V AC outlet for CO2 gas heater in monoMIG 200ik.
• Built in gas cylinder platform with large wheels to ease mobility in workshops with monoMIG 200ik.
• Fan cooling and thermal protection against overheating.
• Standard accessories come with the machine.
Technical Information

Industrial Inverter MIG / MAG Welding MachinesID 300M | Synergic Inverter Technology for Production

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
• 3 Operating Modes; Synergic, Intelligent, Classic. With these options a welder can adapt from conventional to synergic welding easily.
• ONE LCD for ALL parameter selection; Trigger mode(2/4), Wire type, wire diameter, gas type and thickness of the base metal for Synergic Welding and Soft Start,
Pre-Gas, Post-Gas, Burn-Back, Crater Filling timer settings as GENERAL SETTINGS.
• Industry 4.0 features such as; OEE, Arc-On Time reporting, WP setting/controlling/reporting, Barcode and RF Card reading. (Optional)
• 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires.
• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.
• Manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.
• ø300 mm, ø270 mm and ø200 mm diameter spools and drums of any size can be used.
• 24V AC outlet for CO2 gas heater.
• Stable welding current without loss of performance due to electric line fluctuations or with long welding and electrical cables.
• Built in gas cylinder platform with large wheels to ease mobility in workshops.
•Fan cooling and thermal protection against overheating.
• Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models)
• Standard accessories come with the machine.
Technical Information
